Transverse spray volume distribution of rotary atomizer with hydraulic drive
Keywords:
hydraulic drive; liquid distribution; rotary atomizers; sprayersAbstract
Controlled drop application is a promising technology for plant protection. It can be realized only with rotary atomizer. Rotary atomization has the advantage that by altering the rotational speed and/or the feed rate, one can produce a predictable drop size, with a comparatively narrow drop spectrum. In the ISSAPP "N. Pushkarov" a hydraulic rotary atomizer was developed and investi-gated in two ways of mounting the spraying body, down and up. Spray volume distribution pattern across of the boom is determined in the various regime of the operation of sprayer. Software for simulation the interaction of adjacent atomizers at a different distance between them has been developed. In accordance with European quality standards, the possible deviation of the sprays on the working width of the machine is determined. The benefits of a rotary atomizer with an upward spraying body have been proven.
References
Bayat, A., & Bozdogan, N. Y. (2005). An air-assisted spinning disc nozzle and its performance on spray deposition and reduction of drift potential. Crop Protection, 24(11), 951-960.
Bals, E. J. (1978). The reasons for CDA (controlled droplet application). In Br. Crop Prot. Conf., Weeds (Vol. 2, pp. 659-666).
Doble, S. J., Matthews, G. A., Rutherford, I., & Southcombe, E. S. E. (1985, November). A system for classifying hydraulic nozzles and other atomizers into categories of spray quality. In Proceedings of the 1985 British Crop Protection Conference: Weeds, Bracknell, pp. 1125-34.
Kostadinov, G., Dimitrova, E. & Moteva, M. (2011). Modeling of the spray liqiud distribution of rotary at omizers. In: Proceedings 11th International Congress on Mechanization and Energy in Agriculture. 21-23 september 2011, Instanbul, pp. 108-112.
Iliev, Il. (2003). Substantiation and investigation of sun f lower spraying systems. PhD thesis.
Qi, L., Miller, P. C. H., & Fu, Z. (2008). The classification of the drift risk of sprays produced by spinning discs based on wind tunnel measurements. Biosystems Engineering, 100(1), 38-43.
Ru, Y., Jin, L., Zhou, H., & Jia, Z. (2014). Performance experiment of rotary hydraulic atomizing nozzle for aerial spraying application. Transactions of the Chinese Society of Agricultural Engineering, 30(3), 50-55.
Zhao, Y. Y. (2004). Analysis of flow development in centrifugal atomization: Part II. Disintegration of a non-fully spreading melt. Modelling and Simulation in Materials Science and Engineering, 12(5), 973-983.
Downloads
Published
Issue
Section
Categories
License
Copyright (c) 2017 Bulgarian Journal of Crop Science

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

